精彩推荐

二硅化钼电热元件的理化性质

2017-4-30

1.物理性质 Physical property

体积密度
Volume density

5.5~5.6kg/cm3

抗折强度
Bend strength

515~25kg/cm2

维氏硬度
Vickers-hadness

(HV)570kg/mm2

气孔率
Porosity rate

7.4%

吸水率
Water absortion

1.2%

热伸长率
Hot extensiblity

4%


2.化学性质 Chemical property
高温抗氧化性:高温氧化气氛下,元件的表面生成一层致密的石英(sio2)保护层以防止Mosi2继续氧化。当元件保护层熔融,由于表面的张力的作用,sio2熔聚成滴,而失去保护作用。元件在氧化气氛下,再继续使用时,sio2保护层重新生成。
Oxygen-resistance under high temperature: in oxidizing atmosphere,on the surface of element owing to the high-temperature combustion a layer of compact quartz(sio2)protective film is formed to prevent Mosi2 from continuously oxidizing.When the element temperature is higher than 1700℃,the sio2 protective film, Whose fusing point is 1710℃, is fused,and the sio2 is fused into molten drops owing to the action of its surface extension, so that loses its protective ability,In the oxidizing atmosphere,when the element is continuously used,again the protective film forms.
必须指出的是元件不宜在400-700℃范围内长时间使用。否则元件会因低温的强烈氧化作用而粉化。
It should be pointed out that element cannot be used for rather long time in 400-700℃,ot it will be powdered owing to the strong oxidizing action in low temperature.

3.不同气氛对元件温度的影响
The Max temperature of elements in different atmospheres

气氛Atmosphere

最大元件温度 Max element temperature

Songshan Super MS17
Songshan Super MS18

空气Air

1700℃

1800℃

氮气Nitrogen

1600℃

1700℃

氩气Argon,氦气Helium

1600℃

1700℃

氢气Hydrogen

1100~1450℃
1100~1450℃

N2/H295/5%

1250~1600℃

1250~1600℃

应用领域
General applications

 

主要用于工业热处理炉、烧结炉、铸造炉、玻璃熔化炉、冶炼炉等
Most types of industrial furnace for heat treatment,forgoing,sintering,glass melting and refining and for use in radiant tubes

主要用于实验炉、测试设备和高温结炉等
Laboratory furnaces,testing equipment and high temperature sintering production furnace

在线订购(Buy Online)
 >>  硅钼棒-二硅化钼电热元件的电气性质
 <<

网站建设:千舟